How to Reset Tire Pressure Light Honda Civic? A Detailed Guide

Monitoring the tire pressure of your vehicle is crucial to avoid tire damage, high fuel consumption, and accidents. Honda Civic has a built-in monitoring system that checks the tire pressure continuously. But the tire pressure light can sometimes be illuminated even if the tires are inflated enough.

In that case, how to reset the tire pressure light on the Honda Civic? In 2022 models or later, you can reset the light by calibrating tire pressure sensors from the main screen. But if you have older models, use the TPMS button to reset the light.

Let’s give you a step-by-step guide on how you can perform the action.

The Tire Pressure Light and Why It Turns On?

In Honda Civic, Tire Pressure Monitoring System or TPMS is responsible for checking if the tires are properly inflated. Honda Civic models have direct and indirect TPMS depending on the manufacturing year.

Multiple sensors are fitted to the axles, and they measure the rolling radius of tires. If the value for one or more tires deviates from the standard value, the system alerts the user with warning lights. Warning messages also come up on the dashboard in newer models.

But in some cases, the tire pressure warning light might come up even if the tires have the correct pressure. When you inflate the tires, rotate their positions, or replace a tire, the sensors need to be calibrated. 

Until you calibrate the sensors, the system will show the alert, and the tire pressure light will stay illuminated. In that situation, you need to reset the tire pressure light in Honda Civic.

How to Reset Tire Pressure Light in Honda Civic: Step-by-Step Process

We will talk about the process in newer models of the Honda Civic first. If you have a Honda Civic 2022, you can follow this method.

Resetting Tire Pressure Light from the Main Screen

There should be a main display with a touchscreen in your car. Try the following steps.

• Step 1: From the Home screen, select Settings
• Step 2: Go to Vehicle Settings
• Step 3: Tap TPMS Calibration and confirm to start calibration

The calibration process will now start and be completed after a few minutes of driving.

Resetting Tire Pressure Light from the Menu Button

• Step 1: Turn the power on in your car but don’t start the engine. Keep the gear in the parked position
• Step 2: You have a Home button on the left side of the steering wheel. Press the button, and the information menu will appear on the driver’s display
• Step 3: You will see a scroll wheel beside the Home button. Rotate the wheel upward or downward to scroll through the menu
• Step 4: Once the Settings option is selected, press the wheel once to enter the Settings page
• Step 5: Rotate the scroll wheel again to scroll through the Settings page. The TPMS calibration option will appear at some point
• Step 6: Press the wheel again to enter TPMS calibration
• Step 7: Rotate the wheel again until Calibrate appears on the screen. Then, press the wheel to start calibration. You will see the “Calibration started” message at the bottom of the screen. But if you see “Calibration Failed to Start,” you need to repeat the previous steps
• Step 8: Once the calibration process starts, drive the car for a few miles. It might take some time for the system to calibrate. Once the calibration is complete, the tire pressure warning light will go off

Resetting the Tire Pressure Using the TPMS Button

In older models of the Honda Civic, you can’t perform the reset on the screen. Instead, you need to use the TPMS button. Here is the complete process.

• Step 1: If you have recently inflated your tires, but the tire pressure light is still on, drive the car for a few minutes. If it doesn’t reset the light, go to the next step
• Step 2: Turn on your car, but don’t fire the engine. Wait for a few minutes and turn off the car. Then, turn it on again without starting the engine
• Step 3: Find the TPMS button. It should be located on the left side or below the steering wheel. If you don’t find the button, check the owner’s manual
• Step 4: Press and hold the TPMS button for a few seconds. Wait until the tire pressure warning light flashes three times. Once the light blinks, release the TPMS button
• Step 5: Now, turn on the engine and drive the vehicle for a few miles. It might take about 10 minutes for the system to calibrate

Remember, you need to manually check the tire pressure with a pressure gauge before calibrating the system in older models. If necessary, inflate the tires enough and then perform the calibration to get good results. And check the owner’s manual for more help.

If you’re looking for more information on Honda Element AC not working, you may also find our article on Honda Element AC not working helpful. It provides insights into common causes and potential solutions for AC issues in a Honda Element. Additionally, if you need guidance on how to reset the oil life on a Honda Civic, we have a detailed guide on how to reset the oil life on a Honda Civic.

FAQs

Check answers to some commonly asked questions about tire pressure on Honda Civic.

Conclusion

Maintaining the correct tire pressure is crucial for safe driving. It may protect you from heavy expenses and even disasters. When you inflate the tires correctly, the low tire pressure light should go off automatically. But if it doesn’t, you have to reset it manually.

So, how to reset the tire pressure light on the Honda Civic? Depending on the model year of the car, you can reset the light from the main touchscreen or steering buttons or use the TPMS button. Follow the steps mentioned above to reset the tire pressure light.